Swayam Electronics And Communication Engineering Courses & Certifications

The Control and Tuning Methods in Switched Mode Power Converters online course is a 12 weeks program offered by Swayam. Switch-mode power converters (SMPCs) are critical components in energy-efficient power conversion in developing applications such as electric cars, renewable energy, data centres, industrial automation, and so on. In this context, selecting appropriate modulation and control techniques for SMPCs is critical in order to fulfill demanding criteria such as efficiency, transient performance, line, and load management, disturbance rejection, etc. The Control and Tuning Methods in Switched Mode Power Converters training cover all the associated topics and techniques.

While the bulk of commercial regulator implementations are focused on small-signal analysis and pulse width modulation, rising switching frequencies, which are linked in part to bandgap devices, allow for increased operational bandwidth and improved performance. This Control and Tuning Methods in Switched Mode Power Converters syllabus give an introduction to traditional control and modulation methods, highlights small-signal performance constraints, compares controller tuning methodologies, and examines large-signal control approaches. The analysis of tuning approaches demonstrates how large-signal-based classification tuning methods may greatly enhance SMPC efficiency and performance, followed by the requirement for mixed-signal and digital control implementation.

The ‘Power system analysis’ course is offered by the Indian Institute of Technology Kharagpur through the Swayam online education portal. It is a National Program for Technology Enhanced Learning(NPTEL) online free course for the students pursuing their bachelor’s or master’s degree in electrical engineering.

The course helps the students gain comprehensive knowledge of per-unit systems and circuit system applications. This faculty development program by IIT Kharagpur is conducted for twelve weeks and is approved by the All India Council for Technical Education. The undergraduate-level course is guided by Dr. Debapriya Das from the department of electrical engineering at IIT Kharagpur. The course which is a part of the Electrical, Electronics and Communications Engineering, and  Power Systems and Power Electronics domains enables students to earn three-course credits. The course certificate received after completion of the ‘Power system analysis’ online training consists of NPTEL and IIT Kharagpur logos that represent its authenticity. 

The ‘Principles and Techniques of Modern Radar Systems’ is a study about the multisystem of radars in electronics engineering. The radar system principles program is a National Program for Technology Enhanced Learning Program that provides free online training to the students pursuing their undergraduate and postgraduate levels in electrical engineering, electronics and communication engineering, or communications and signal processing, on the Swayam education platform.

This elective course is offered by the Indian Institute of Technology Kharagpur for twelve weeks by the course instructor, Dr. Amitabha Bhattacharya, an associate professor from the department of electrical, electronics, and communication engineering at IIT Kharagpur.

The ‘Principles and Techniques of Modern Radar Systems’ online training program is approved by the All Indian Council of Technical Education and allows the students to gain three credits after completion of this course. The candidates of this faculty development program can avail of the certificate which is e-verifiable containing the logos of NPTEL and IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ online course is about the functioning and principles of various kinds of electro-mechanical instruments. This is a National Program for Technology Enhanced Learning online course by the online education platform Swayam. The online course is developed and organized by the Indian Institute of Technology Kharagpur.

This NPTEL free online course is conducted for twelve weeks and is a core course for the students of undergraduate level. It is categorized under the domain of electrical, electronics, and communication engineering, control, and instrumentation along with power systems and power electronics. The course instructor for the All India Council for Technical Education (AICTE) approved online program is Dr. Avishek Chatterjee from IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ training program enables the students to gain three credit points and provides the eligible students with an e-certificate with the logos of NPTEL and IIT Kharagpur after course completion.

The study of networks here in Communication Networks Certification calls for an understanding of network topologies, protocols, or algorithms that handle various information-exchange tasks or subtasks as well as tools for network design and performance analysis.

The properties and structure of communication networks are covered in detail in Communication Networks Classes to enable the back-and-forth movement of a physical entity, any network containing nodes and branches in any data communication and computer networks. 

All students get a Communication Networks Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Signal Processing Techniques And Its Applications Certification is that the information that they contain can be displayed, analyzed, or converted to another type of signal that is useful. In the practical world, analog products detect signals such as sound, light, temperature, or pressure and manipulate them accordingly to their usage.

Signal Processing Techniques And Its Applications Classes teach about the modern applications that have penetrated a wide range of systems, such as consumer electronics, digital communications, medical imaging, and so on.

All students get a Signal Processing Techniques And Its Applications Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

The primary purpose of Analog Electronic Circuits Certification is to serve as a foundational course for undergraduates and as a refresher course for graduate students and circuit designers employed in the industry.

It strikes the ideal mix between theory and practice in Analog Electronic Circuits Classes so that the studied circuits can be built in a laboratory course for undergraduates and their measured performance can be easily compared to the theoretically expected performance. It boosts theoretical confidence. 

All students get an Analog Electronic Circuits Certification by the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam initiative by the Government of India.

Signals and Systems online course is a core program provided by Swayam in association with NPTEL for students at the undergraduate level. The course is offered and curated by the esteemed faculty of IISER Bhopal. Students will get a thorough understanding and will be introduced to the fundamentals of signal processing and systems analysis.

The Signals and Systems certification by Swayam is offered in the Hindi language, but the lectures will also use scientific terms in English. Basically, students will learn the concepts and their explanations in Hindi. Further, the course falls under three broad categories that include- 'Communication and Signal Processing'  ‘Electrical’, Electronics and Communications Engineering', and lastly, 'Control and Instrumentation'. 

The Signals and Systems certification syllabus will include continuous-time systems and signals and introduce students to the various types of signals and transformations. After finishing the twelve-week program, students can register for the proctored examination to obtain a soft copy of a certificate.

Developed by IISc Bangalore, the Mathematical Methods and Techniques in Signal Processing programme extensively covers the various aspects of signal processing over the course of 12 weeks. All the modules are provided online by Prof. Shayan Srinivasa Garani and instructed in English.

The Mathematical Methods and Techniques in Signal Processing syllabus deep dives into topics like basic signals, systems & signal space, sampling theorems, signal representation, and wavelets. This way, the course will make you theoretically adept in signal processing.

You will also learn the core practices, methods, and techniques to efficiently carry out digital signal processing. Moreover, the Mathematical Methods and Techniques in Signal Processing online course has a PG level difficulty. If you have a strong background in basic DSP, you can upskill comfortably by enrolling in the Mathematical Methods and Techniques in Signal Processing course by Swayam. This FDP (Faculty Development Programme) course is also duly approved by AICTE.

The Photonic integrated circuit certification course will help candidates know about the different circuits involved in the design. The course and the curriculum for the course have been very well planned to keep in view of all the needs and exposure in this field today.

The experts will be conducting the sessions and discussion forums on an interactive basis so that the candidates do not face any trouble while learning the topics. The candidates will be able to understand basic topics such as coupling light in a waveguide system.

Assignments will be given to the candidates after the completion of every module. A marking scheme has been designed by the experts, to assess the candidates during the Photonic integrated circuit certification benefits. There is an end-term exam included in the course for all the aspirants who want certification. The candidates can reach out to the help desk or administration for any of their concerns.

Sensors and Actuators program is an undergraduate and postgraduate level FDP course approved by the AICTE. The online course falls under the control and instrumentation domain which is a part of the broader category of electrical, electronics, and communication engineering. Designed by IISc Bangalore, this program will run for twelve weeks and equip students with knowledge on microtechnology and related topics.

The Sensors and Actuators certification by Swayam consists of a well-curated and comprehensive curriculum that focuses on sensors and actuators and their importance and function in the real world. Students can enroll for free in this interesting course that will consist of video lectures created for a thorough understanding of the subject. 

Furthermore, candidates can go through a list of texts referred to in the course by the instructor and prepare for the final exam. The proctored exam is held for those who wish to gain a Sensors and Actuators certificate to showcase their knowledge and accomplishment of completing the entire course. The training falls under the areas of control and instrumentation and electrical, electronics, and communications engineering.

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ online course is offered by the Swayam platform, an initiative by the ministry of education in India. This design-based program is developed and structured by the ‘National program of Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC).

This is an elective course provided for the students and faculty in the engineering domain who will develop their skills and expertise in circuit designs. 

The course educator for this online training program on Op-Amps is Dr. Hardik J. Pandya who is an assistant professor from the department of electronics systems engineering which is under the division of electric sciences in IISC, Bangalore. The program is part of the electrical, electronics, and communications engineering that will fetch the students with three credit points. 

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ is a certification program that is scheduled for twelve weeks for the candidates of the course.

The Design of photovoltaic systems online course is a faculty development program advocated by the AICTE and is developed by the National Programme of Technology Enhanced Learning and the Indian Institute of Science in Bangalore. This design-based program is an elective course and a part of electrical, electronics, and communication engineering.  

In this course, the learners gain an understanding of the functioning of the photovoltaic cell and its design system and structure. The program is organized for a period of twelve weeks and the course educator for this course is a faculty from IISC, Prof. L. Umanand from the department of electronics systems engineering. The course curriculum provides three credit points and levels of the undergraduate or postgraduate standard for the students. 

The Design of photovoltaic systems training provides an opportunity for the students to discuss the principles of electrical features and coordination in the PV cells and circuits through an experiential learning process.

The ‘Fabrication Techniques for MEMs-based sensors: clinical perspective’ online course is provided on the online education portal, Swayam by the ministry of education in India. This course is a faculty development program accredited by the AICTE and is developed and offered by the National Program for Technology Enhanced Learning(NPTEL) in partnership with the Indian Institute of Science(IISC), Bangalore.

The fabrication techniques program is an elective course that is scheduled for a period of twelve weeks and is part of the electrical, electronics, and communications engineering domain. The students of this course will get an opportunity to explore the aspects of fabrication and microengineering. The course instructor for this undergraduate-level training program is Prof. Hardik Jeetendra Pandya from the department of electronics systems engineering in the division of electrical sciences. 

In this course, the students will gain an experiential understanding of the techniques and principles while also receiving the three credit points and the Swayam course certificate that consists of the logos of NPTEL and IISC.

The ‘Enclosure design of electronics equipment’ online course is about the process and techniques of product designing of electronic equipment and devices. This program is a National Program for Technology Enhanced Learning(NPTEL) online certification course and is developed and offered on the Swayam online education portal by the Indian Institute of Science (IISC) Banglore. This faculty development program on electronics design is approved by the AICTE and aids in the skill development of the candidates in the field of electrical engineering, and electronics and communication engineering. 

The learners of this course will gain three credit points after completing the course study guided by the IISC faculty, Prof .V.Chalapathi Rao from the department of electronics systems engineering in IISC. The course on ‘Enclosure design of electronics equipment’ by Swayam aids in the discussion of issues in the mechanical aspects of electronic equipment design and prototyping. This online elective NPTEL course is conducted for twelve weeks for undergraduate and postgraduate level students.

The Digital Control in Switched Mode Power Converters and FPGA-based Prototyping certification course pioneers Digital Control and FPGA-based Implementation for Switched Mode Power Converters. This course caters to power electronics industry practitioners. Covering benefits, simulation, modelling, Verilog HDL, and practical implementations, it offers insights into digital control's evolution and industry demands.

Industry giants like STMicroelectronics, Qualcomm, and Texas Instruments support the Digital Control in Switched Mode Power Converters and FPGA-based Prototyping certification by Swayam. It requires a background in Electrical/Electronics Engg., exploring diverse aspects of digital control, empowering students with skills pertinent to contemporary power electronics trends and fostering academic-industry collaborations.

The Digital Image Processing certification course explores techniques and algorithms for enhancing digital images, addressing applications in human perception and autonomous machines. With a 12-week duration, the course is categorised as an elective, for both undergraduate and postgraduate levels. Industry support from defense labs like DRDO and ISRO highlights its practical relevance.

The Digital Image Processing certification by Swayam delves into enhancing image quality for human perception and applications in autonomous machines. It requires a foundation in Digital Signal Processing, making it suitable for both undergraduate and postgraduate levels. Industry support from DRDO, ISRO, and TCS underlines its practical significance.

Also Read: Online Digital Image And Video Processing Certification Courses

Nanobiophotonics integrates biology, photonics, and nanotechnology to explore light's role in understanding and treating diseases. The Nanobiophotonics: Touching Our Daily Life certification course targets final-year UG/PG/PhD students, emphasising applications in chemistry, biology, and medicine. With prerequisites including basic optical physics knowledge, the course bridges theoretical and practical aspects.

The Nanobiophotonics: Touching Our Daily Life certification by Swayam provides valuable insights into emerging research. Supported by industry giants like Philips and Thermo Fisher, This certification course equips participants with skills relevant to Electrical Engineering, Electronics, Communications, and Photonics, earning them 3 postgraduate credit points upon completion.

Also Read: Online Nanotechnology Engineering Certification Courses

The Pattern Recognition And Application certification course explores Signal Processing, Probability, and Graph Theory. Covering pattern recognition, including statistical, nonparametric, and neural network techniques, the course explores applications in machine vision and speech recognition. With an emphasis on analytical aspects, it equips students to apply concepts to real-world challenges upon completion.

Open to any interested learners, the Pattern Recognition And Application certification by Swayam covering Electrical, Electronics, and Communications Engineering explores feature extraction, pattern representation, and time-varying pattern recognition. With practical examples from machine vision and speech recognition, it delves into unsupervised classification techniques.

Also Read: Online Artificial Intelligence And Machine Learning Certification Courses

The Power System Protection certification course is vital in BTech Electrical Engineering, covering contemporary technologies and practices in power systems, with a focus on Indian applications. Also offered as an elective in IITs, it is integral to M Tech Power System programmes. It emphasises real-world challenges and requires a background in this field. 

Catering to both undergraduates and postgraduates, the Power System Protection certification by Swayam awards 3 credit points. Industries like Power Grid, POSOCO, State Electricity Boards, ABB, and GE support this core course, ensuring graduates are well-equipped for roles in high voltage engineering and the broader electric supply systems domain.

The Linear Dynamical Systems online course will be elaborately dealing with the linear system and will discuss the cornerstone of the existing control theory. The online certification program serves as a prerequisite course and subject for almost all the advanced level graduate programs and courses in this particular domain. The aim of this program on  Linear Dynamical Systems by Swayam is to make the candidates exposed to the elementary concepts of linear algebra.  The eight-week program will be comprehensively dealing with the following topics-state-space solutions and realizations, controllability: part, stability. 

The course will be helping the candidates to strengthen their basic logical arguments that exist behind the mathematical proofs and problems. The entire program will be conducted on the online medium to help the students develop a more elaborate and fuller perspective of the linear system theory. The students in the session will thus develop their skills to solve the problems that are related to the linear dynamical systems.

The Dc Microgrid and Control System online course is an 8 weeks program provided via Swayam, an Indian government’s education ministry initiative. The elective course lecture is provided by the top faculty of IIT Roorkee.

This Dc Microgrid and Control System training is appropriate for PG students who study system and control, power systems, and power electronics. The course explains the essential principles of microgrids and their components, as well as the many types of microgrids and the benefits of microgrids over the central conventional grid. 

The Dc Microgrid and Control System syllabus specifically explain broad ideas and applications, control techniques, and the principles of functioning of DC microgrids. The course is ideal for researchers and students in the power system fields who want to do research in the rapidly developing and rising renewable energy technologies.

The Electrical Distribution System Analysis online course is offered by Swayam. A power distribution system's structure and load patterns differ substantially from those of a transmission system. Furthermore, with the introduction of distributed storage, and smart generation grid technologies, distribution networks are shifting from passive to active.

As a result, analytical techniques designed for transmission systems will not be immediately relevant to distribution networks. This Electrical Distribution System Analysis training will cover components (distribution transformer, feeders, regulators, loads, capacitors, storage, distributed generation, etc.), analysis(short-circuit, load flow, etc.), and modeling methodologies created specifically for the distribution system.

The Electrical Distribution System Analysis syllabus includes Distribution feeder configurations, the Computation of transformers, distribution transformers, overhead lines, cables and feeders, distribution system analysis, load flow analysis, etc.

Digital Protection of Power System Certification begins with a state-of-the-art survey of theories and methods of digital/numerical relays and phasor measurement units (PMUs) along with IEC 61850 substation and automation protocols.

Digital Protection of Power System Classes gives a theoretical overview and examples of practical engineering solutions to a range of technical issues, including load shedding and frequency relaying, reclosing and synchronizing, protection problems caused by the interconnection of distributed energy resources in the grid, and digital protection of various electrical apparatus, such as generators, transformers, transmission lines, etc.

All students get a Digital Protection of Power System Certification from the Indian Institute of Technology Roorkee (IIT Roorkee) under the Swayam Initiative by the Government of India. 

The ‘System Design Through VERILOG’ online course is a study about the fundamentals and the techniques used in Verilog, a hardware description language for design and synthesis. This is an elective course for the students who are at the undergraduate and postgraduate levels provided on the Swayam online education platform. The National Program for Technology Enhanced Learning (NPTEL) free course is developed and offered by the Indian Institute of Technology Guwahati.

The course instructor for this All India Council for Technical Education(AICTE)  approved course is Prof. Shaik Rafi Ahamed from the IIT Guwahati. The course is categorized under the domain of electrical engineering, electronics, and communications engineering along with VLSI design. The students of the ‘System Design Through VERILOG’ training course can earn two credit points and a course certificate consisting of the authenticated logos of NPTEL and IIT Guwahati.

The online program is conducted for the students, faculties and industry professionals for eight weeks.

Design of Power Electronic Converters Certification is about the basics of power electronics, different types of power converters that are used in industry, and their applications such as DC/DC, AC/DC, DC/AC, and AC/AC Converters. It mainly converts the electrical energy of one type into another with different characteristics and is used to drive any device that requires an input of electric power other than that supplied by the primary power source.

Design of Power Electronic Converters Classes covers the basics of Power Electronics Types of Power Converters and their usage in the optimization of algorithms that select optimal parameters and components.

All students get a Design of Power Electronic Converters Certification from the Indian Institute of Technology Guwahati (IIT Guwahati) under the Swayam Initiative by the Government of India. 

An Introduction to Information Theory training encompasses dealing with certain key concepts of information theory which will further address the fundamental questions of the fundamental limit of data compression and the maximum data rate for transmission over a communication link. Taught by experienced IIT Kanpur faculty, this course will also enlighten learners about practicing source compression algorithms and determining the computed channel capacity of simple channels.

An Introduction to Information Theory certification syllabus will be covered in eight weeks when candidates can learn at their own pace within the comfort of their homes. The course is being offered by NPTEL to bridge the digital divide between the privileged and the lesser privileged. Since SWAYAM is an indigenous IT platform initiated by the Government of India, pursuing the course would be instrumental for self-actualization, in turn providing opportunities to candidates for life-long learning.

Moreover, its coherent pace will even help amateurs understand basic concepts surrounding the topic. Candidates can check their learning through self-assessed tests and participate in discussion forums for clearing their doubts.

The Electromagnetic Waves in Guide and Wireless Media programme is an eight-week study that focuses on the propagation of guided electromagnetic waves. The elective programme stresses transmission, radiation, and diffraction of EM waves. Moreover, several companies and sectors, including ISRO and DRDO, support wireless communications and EM waves studies. 

Students need to submit eight assignments based on solving computational and conceptual problems as part of the Electromagnetic Waves in Guided and Wireless Media certification syllabus. The course sets an undergraduate/postgraduate level of study. Students can utilise the video lectures and references that come with the programme for learning effectively.

Developed by IIT Kanpur, Professor Pradeep Kumar from the Electrical Engineering department instructs the course study. For the Electromagnetic Waves in Guided and Wireless Media certification, candidates must satisfy both criteria mentioned for the certificate, i.e., averages assignment and proctored test scores, after paying a nominal fee.