With a category rank of 34527 in the SC category for Mechanical Engineering in the 2025 JEE Main exam, you have a good chance of securing a seat in several National Institutes of Technology (NITs). However, admission to the top-ranked NITs for the Mechanical Engineering branch might be competitive even with the SC category reservation.

Based on the previous year's cutoff trends, particularly for the SC category, you can likely get into some of the newer NITs. These NITs often have lower cutoff ranks compared to the older, more established ones. You might find opportunities in NITs located in states like the North-Eastern states, some of the centrally funded technical institutes (CFTIs), or even some of the state NITs where the closing ranks for the SC category in Mechanical Engineering fall within your rank range.

To give you a more specific idea, you should refer to the JoSAA (Joint Seat Allocation Authority) counseling data from previous years. Look for the closing ranks for the SC category specifically for Mechanical Engineering in each NIT. Websites like Careers360 and Shiksha often compile this data, which can give you a good indication of your chances.

Keep in mind that cutoff ranks can vary each year depending on factors such as the number of applicants, the difficulty level of the exam, and the number of available seats. Therefore, it is crucial to check the official JoSAA counseling website for the most up-to-date information during the counseling process in 2025.

During the JoSAA counseling, it is advisable to fill in as many choices of NITs and their Mechanical Engineering programs as possible, starting from your most preferred to the least preferred options. This increases your chances of securing a seat in one of the NITs based on your rank and category. Good luck with the counseling process!

Visit our College predictor tool:- https://engineering.careers360.com/jee-main-college-predictor?ici=nav-header_engg&icn=jee-main_cp-lp

Government College of Engineering (GCE), Karad, primarily offers B.Tech admissions through the Maharashtra Common Entrance Test (MHT CET) rather than JEE Main. However, for All India Seats under the Centralized Admission Process (CAP), JEE Main scores are considered.

For Mechanical Engineering, based on the CAP Round I cutoff for the academic year 2022-23, the closing rank for Mechanical Engineering was 34,893 for the General Open (GOPEN) category.

Additional Information:

- Admission Process: For Maharashtra State Quota seats, admissions are based on MHT CET scores. For All India Seats, JEE Main scores are used.

- Category-Specific Cutoffs: Cutoff ranks vary based on categories such as General, OBC, SC, ST, and EWS.

- Closing Ranks: The closing ranks mentioned are based on previous years and may vary annually.

For the most accurate and up-to-date information, it is recommended to consult official notifications from the Maharashtra State CET Cell. GCR karad

The admission process for MITS Gwalior, like most NITs and private engineering institutions, is based on the rank obtained in the JEE Main exam, and the cutoffs for various branches and categories can vary each year. Based on your CRL rank of 725784 and your Gen EWS rank of 91098, getting admission into MITS Gwalior in popular branches like Computer Science Engineering (CSE), Mechanical Engineering, or Civil Engineering may be difficult, especially for the general category, given the typically high demand for these branches.

Here’s a breakdown:

1. CSE (Computer Science Engineering) :

   • CSE is one of the most sought-after branches at any institution, and the cutoffs for this branch are usually very high. With your CRL and Gen EWS ranks, securing a seat in CSE might be a challenge, especially if you are competing with candidates from all over the country.

2. Mechanical Engineering :

   • Mechanical Engineering is also a popular branch, but the cutoff ranks tend to be lower than CSE. However, your rank might still be higher than the typical cutoff for this branch in MITS Gwalior, even with home state quota.

3. Civil Engineering :

   • Civil Engineering typically has a slightly lower cutoff compared to CSE and Mechanical Engineering, which may increase your chances of getting a seat. If you are considering this branch, you might have a better chance of admission, but it will still depend on the exact cutoff trends for that year.

4. Home State Quota (Madhya Pradesh) :

   • Home state quota may provide some relaxation in cutoffs, but the competition is still intense, and cutoffs are subject to fluctuation each year. The home state quota can help reduce the rank required, but your CRL rank will still play a significant role.

Conclusion : While it is unlikely to secure a seat in highly competitive branches like CSE at MITS Gwalior with your current ranks, you may have better chances in Civil Engineering with the home state quota. It's crucial to check the official cutoff trends for the current year through the official JoSAA website or MITS Gwalior’s counseling details for more accurate information.

I recommend you keep an eye on the official counseling updates and consider other options as well to ensure a broader range of opportunities. Good luck!

Hi aspirant,

After finishing a Diploma in Mechanical Engineering, you can apply for admission to a degree program, typically through a lateral entry program.  This allows you to begin the second year of a B.Tech (Bachelor of Technology) degree, generally skipping the first year of study.

All the best!

Hello,

Yes, you can get admission to a degree course after completing a Diploma in Mechanical Engineering.

You can apply for a Bachelor's degree (B.Tech or B.E.) through the lateral entry route. This allows you to join the second year of the degree course directly.

You'll need to check the specific eligibility criteria and entrance exams for the college or university you are interested in.

Hope it helps !

Yes, you can pursue a degree after completing a Diploma in Mechanical Engineering. Many universities and institutions offer lateral entry programs for diploma holders, allowing you to directly join the second year of a Bachelor's degree (B.Tech/B.E.) in Mechanical Engineering or a related field. You may need to meet specific eligibility requirements and go through an entrance exam, depending on the institution.

Degree after diploma

• 79.28 percentile in JEE Main 2025 gives a chance for Mechanical Engineering at Tezpur University School of Engineering under OBC-NCL Female (North East) quota.

• Quota : 60% reserved for North East candidates .

• Previous Year Cutoff : Mechanical Engineering (Female) rank: 22,316–27,364 (OBC-NCL).

• Your Rank : Around 90,000–1,10,000 .

• Eligibility : Must have 75% in Class XII or be in the top 20 percentile .

• Next Steps :

  • Monitor official Tezpur University cutoffs.

  • Prepare documents for CSAB-NEUT counseling.

Hello,

Based on your SC category rank of 7,400 in JEE Main 2025, it might be difficult to get Mechanical Engineering at IIEST Shibpur . Last year, the closing rank for SC candidates from other states in Mechanical Engineering was around 6,706.

However, you can still consider other good colleges where your rank may be sufficient. Institutes like NIT Agartala, NIT Meghalaya, or IIITs in newer locations often have higher closing ranks for SC category students. It's a good idea to check the previous year's cutoffs for these colleges to see where you might have a chance.

Also, keep an eye on the counselling rounds, as sometimes seats become available in later rounds.

You can use our JEE Main College Predictor tool to predict which colleges you can get based on your score.

Best of luck with your admissions!

When choosing between Mechanical Engineering at NIT Raipur and ECE (Electronics and Communication Engineering) or DSAI (Data Science and Artificial Intelligence) at IIIT Naya Raipur, it’s important to consider several factors, including your interests, career goals, and the long-term opportunities available in each field. Let’s break it down:

1. NIT Raipur – Mechanical Engineering :

• Branch Overview : Mechanical Engineering is a traditional and well-established branch. It offers a solid foundation in core engineering principles, and you can work in various industries such as manufacturing, automotive, aerospace, and energy.

• Placement Opportunities : NIT Raipur has good placement records for Mechanical Engineering, with many reputed companies recruiting for roles in design, manufacturing, production, and more. However, competition is stiff, and placements depend on the industry demand.

• Long-Term Prospects : Mechanical Engineering offers long-term career stability, but the field may require advanced studies or specialized skills to stay competitive in a rapidly evolving job market.

2. IIIT Naya Raipur – ECE or DSAI :

• Branch Overview : ECE and DSAI are emerging fields with a focus on modern technologies. DSAI, in particular, focuses on cutting-edge fields like machine learning, data science, AI, and big data, which have significant demand across industries.

• Placement Opportunities : IIIT Naya Raipur has a strong focus on tech and research, and DSAI and ECE have a high placement rate in IT, data science, AI, and software development roles. The tech field has more rapidly growing job opportunities, and if you are inclined towards software and technology, DSAI might be a very good fit.

• Long-Term Prospects : Both ECE and DSAI have excellent prospects due to the growing demand for technology professionals in industries like AI, software, and digital transformation.

3. Placements Without Tech Field Experience :

• Mechanical Engineering at NIT Raipur : While NIT Raipur is known for its engineering strength, companies primarily look for candidates from relevant fields like mechanical design, manufacturing, etc. If you pursue a non-tech career, like in management or sales, you might still have opportunities, but they are usually less common.

• Tech Fields (ECE/DSAI) : In tech-related fields, companies are more likely to hire students without prior technical experience if they possess a strong understanding of the subject and skills like programming, problem-solving, and relevant technical knowledge. For example, a DSAI graduate can get placement in software development or AI roles even without prior industry experience, as long as they have strong technical foundations.

Conclusion :

• If you are passionate about working in traditional engineering sectors (like automotive or manufacturing), Mechanical Engineering at NIT Raipur could be the better choice.

• If you are inclined toward modern technology and want to explore fields like Data Science, Artificial Intelligence, or Electronics , then DSAI or ECE at IIIT Naya Raipur might offer better opportunities, especially in tech-driven sectors.

• Placements : Companies do hire students from non-tech fields, but tech branches like ECE and DSAI will give you a clear edge when it comes to job roles in IT, AI, and software.

Final Recommendation : If you're interested in core mechanical industries, NIT Raipur is a good choice, but if you want to dive into emerging technologies, DSAI or ECE at IIIT Naya Raipur could be a better fit.

Good luck with your decision-making!

The cutoff for the Mechanical Engineering program at Vellore Institute of Technology (VIT) through the VITEEE (VIT Engineering Entrance Examination) typically varies each year based on factors such as the number of applicants, difficulty level of the exam, and seat availability.

According to previous year's data, candidates aiming for a seat in Mechanical Engineering at VIT Vellore usually need to secure a rank within the 6,000 to 20,000 range in the VITEEE.

However, this range changes every year.