Online Engineering And Architecture Courses & Certifications

This course, which has been offered under NPTEL is funded by MoHRD, taught by IIT Madras. It focuses on the basics of fluid and particle mechanics. The course consists of topics in chemical engineering. This course will introduce the concepts of fluid and particle mechanics and also demonstrate their applications. Students will be taught to apply these concepts in various engineering problems. 

This course is imparted by Prof. Basavaraju, Assistant Professor, Department of Chemical Engineering, IIT Madras, and Prof. Sumesh, Assistant Professor, IIT Madras. This course will teach you topics such as Navier Stokes equations, Poiseuille flow, viscosity, fluid statics, Bernoulli’s equation, cylindrical coordinate system, etc. You will also learn kinetic energy correction factor and momentum, pressure drop, boundary layer, scaling parameters, and non-dimensional analysis.

Concepts of fluid and particle mechanics are used in many places in industries as well as laboratories, etc. It is important for you to take the subject seriously if you want to pursue Chemical Engineering. This course gives you an introductory base to learning and being able to apply the principles required when solving engineering problems. 

The Computational Fluid Dynamics Training course manages the mathematical arrangement of conditions overseeing liquid streams and would hold any importance with specialists and researchers—both trying and expert. The course manages the essential procedures that empower the mathematical arrangement of conditions, for example, stream-related highlights and wonders identified with the liquid stream. 

In this course the candidate will understand and know about the advanced methods of solution of linear algebraic equations, fundamental methods that empower the mathematical arrangement of these conditions, calculation of fully developed flow in a triangular duct, equations for incompressible flow and boundary conditions, and many more by the end of  Computational Fluid Dynamics Certification Syllabus.

The instructor in the course is professor Sreenivas Jayanti, a faculty of IIT Madras. This is a self-paced course for the duration of 12 weeks. The course will provide the candidates with in-depth knowledge about fluid dynamics. The Computational Fluid Dynamics Certification Fees are free of cost where candidates can access the course materials for free all throughout the course duration.

The Environmental Quality Monitoring & Analysis course by SWAYAM is an elective course in Chemical Engineering. This AICTE approved programme explores the risks involved in an environment’s health through assessments. Its learning is backed with industrial support from Environmental Consulting. The curriculum integrates online lectures, learning modules, written assignments, and book references.

The course spreads across 12 weeks of training. The Environmental Quality Monitoring & Analysis certification syllabus opens learning to toxicology, sediments, atmospheric dispersion models, equilibrium, quality assurance, and quality controls. Students need to have a preliminary understanding of mathematics, chemistry, environmental engineering, physics, and chemical engineering before commencing the course. This training is set at an undergraduate/postgraduate level of study.

Developed by IIT Madras, Dr Ravi Krishna R-Associate Professor from the institute mentors the students of the Environmental Quality Monitoring & Analysis online course. Candidates can opt for a verified certificate. For this, students need to appear for a proctored exam after paying the necessary exam fee.

The Model Predictive Control: Theory and Applications certification syllabus will give the candidates an overview of MPC. It covers both theories as well as all the practical applications. For some of the modules, the course also offers MATLAB hand-based learning. The candidates will be able to understand and solve all the advanced control problems.

The aspirants will become aware of the practical and industrial relevance. The course focuses on the multiple aspects of the implementation of MPC. The course extensively covers all the system models so that the candidates have smooth and better learning. 

The Model Predictive Control: Theory and Applications online course also offers the participants certification for their remarkable journey of learning. The experts also provide experience on the tools so that the candidates are able to easily implement the learning whenever they are exposed to the industry. The state estimation has been broadly explained so that the candidates do not face any problem understanding the same.

The Process Control- Design, Analysis, and Assessment certification course trains students with all the necessary knowledge regarding tuning, stability, and controller concepts usually taught in a control class. This undergraduate course falls under the shared domain of chemical engineering, computational chemical engineering, and minor 2 in chemical. 

The Process Control- Design, Analysis, and Assessment training enables students to understand the MIMO control concepts at the most basic level for enhanced clarity of the process. Spread over 12 weeks, this course is taught by Professor Raghunathan Rengaswamy, who is currently working as a professor of the Department of Chemical Engineering at IIT Madras. 

The Process Control- Design, Analysis, and Assessment online course also enables students to obtain accreditation from one of India’s preeminent institutions, IIT Madras. The e-certificate will feature the name of the student, his/her photograph, the final score, and the logos of NPTEL and IIT Madras.

The Chemical Reaction Engineering II by Swayam is an industry-based engineering course. In this course, an understanding of the multiphase reactors will be given. Different concepts in chemical engineering will be taught. The reasons behind the productivity of products, their importance, and identification will be discussed. This is a second-level course which is a follow-up of the first level chemical reaction engineering course.

This course is available online only the final exam will be held in the specifically designated centers. The course content doesn’t require any payment. The course is specifically for individuals with an engineering background. It is verified by NPTEL and the Indian Institute of Technology Bombay. This course will be instructed by the one-course instructor and two assistants.

The Chemical Reaction Engineering II certification will be provided in the e-certification mode. The certification has accreditation's of NPTEL and the Indian Institute of Technology Bombay. The certification is easily shareable on platforms such as Linkedin. This certification will have professionals in their careers and students on their academic journey.

The Introduction to interfacial waves online course is a study about the wider aspect of vibrations and oscillations along with the specific focus on the challenges in hydrodynamic stability. This National Program for Technology Enhanced Learning(NPTEL) online course is developed and offered by the Indian Institute of Technology(IIT) Bombay for students pursuing chemical engineering and mechanical engineering as an elective course.

The course instruction is conducted for twelve weeks and the course educator for this faculty development program is Dr. Ratul Dasgupta, an associate professor from the department of chemical engineering at IIT Bombay.

The students of this online training program are provided with three credit points and a course certificate. The course certificate consists of the logos of NPTEL and IIT Bombay adding more value to it. The online course on introduction to interfacial waves is provided on the Swayam education platform and is a postgraduate level program.

The Chemical Process Instrumentation by Swayam enables candidates to understand the key dynamics and basics of chemical process instrumentation. The programme gives a comprehensive understanding of principles and practices of measurement of important chemical process variables namely, concentration, flow, level, pressure, temperature, etc. The programme is best suited for candidates who have completed their undergraduate in the discipline of allied engineering, instrumentation and chemical. This course is available for Chemical engineers, Instrumentation engineers, and Chemical technology engineers. 

The Chemical Process Instrumentation Course by Swayam, may be of general interest to many chemical process industries like- Tata Chemicals etc., Haldia petrochemicals ltd., Indian oil corporation ltd. The e-certification is available after passing a proctored exam with the candidates’ name, photograph and the score in the final exam with the breakup and it will be e-verifiable on nptel.ac.in/noc. This course will be taught or instructed by Prof. Debasis Sarkar (IIT Kharagpur). The enrollment of this programme is fully free of costs and the course materials are easily accessible to learn. The e-certification will be provided after passing a paid proctored examination. The individuals must be of undergraduate level. This course falls under the category of Chemical engineering.

The Optimization in Chemical Engineering certification course is optimally designed towards learning the aspects and fundamentals that are included in the procedure of the field chemical engineering. The course provides a brief overview of the industry with its subcomponents and focuses on how much each component is essential to complete the one process employed in the respective field. 

The purpose of this Optimization in Chemical Engineering training is to expose engineering students to automation techniques, with a focus on problems that occur in applications of chemical engineering. Both linear and nonlinear programming problems are included in the course. The fundamental principles of optimization and how to achieve a statistical description of the optimization problem are discussed in the first part of the course. 

The second section of the course discusses various methods for solving certain problems that can be used to eventually solve them. Finally, it also addresses a collection of software methods to solve optimization problems. Upon satisfactory completion of this Optimization in Chemical Engineering certification, the student will be able to understand the core scientific concepts of optimization, articulate the problem of optimization, and choose the best method/solver for solving the problem of optimization.

The Transport Phenomena certification course is designed with a phenomenal structural course that will give a complete fundamental understanding that is involved in chemical engineering. For all students of chemical engineering, this is a fundamental subject and is also relevant in disciplines as varied as mechanical engineering, biotechnology, and nanotechnology. 

The topic has revolutionized the way engineering science is taught over the past few decades. This chapter dealt with the integrated care of the various transport systems, both in industry and in nature, which is everywhere. Owing to the underlying similarity of the mathematics and molecular processes explaining those methods, momentum, heat, and mass transfer are taught together. 

The Transport Phenomena training will include equal industrial support that will help the enrolled candidate to learn about the segments more analytically. The course will begin with a fundamental understanding of the core modules that is essential to understand the later portion. Students would be made aware of the key science ties and motivated to address questions on the basis of apt analogies. The Transport Phenomena certification would be provided in the last that is the assured certificate for the candidates who want to pursue some high courses in the upcoming future.

The ‘Upstream LNG Technology’ training program is a National Program for Technology Enhanced Learning online free course developed by the Indian Institute of Technology Kharagpur. The informative course is provided on the Swayam online education platform for the students of undergraduate and postgraduate levels.

The online training is scheduled for twelve weeks and the course study is guided by Prof Pavitra Sandilya from the cryogenic engineering center in IIT Kharagpur assisted by two other research scholars. This faculty development program is approved by the All India Council for Technical Education and is part of the chemical engineering and physics category. The participants of this online program will gain three credit points and a course completion certificate after completing the course and clearing the exam with the required mandates. The course certificate of the ‘Upstream LNG Technology’ online course consists of the NPTEL and IIT Kharagpur’s logos which makes the certificates more significant and authorized.

The ‘Flow Through Porous Media’ National Program for Technology Enhanced Learning (NPTEL) online course describes the classification and application of porous media flow with an understanding of industrial applications. This course is provided on the Swayam online education platform to the students of undergraduate, and postgraduate level from various disciplines of engineering which includes petroleum, biochemical, soil science, geotechnical, and hydrology. This elective course is developed and offered by the Indian Institute of Technology(IIT) Kharagpur.

This faculty development program on porous media flow will take twelve weeks to complete the course. The course instructor for the AICTE approved online training program is Prof. Somenath Ganguly from the department of chemical engineering at IIT Kharagpur. The candidates who take this elective course will be provided with three credits for their undergraduate or postgraduate program. Along with the course credits, the eligible students can get the course certificate which consists of the logos of NPTEL and IIT Kharagpur.

The Transport Processes I: Heat and Mass Transfer certification course will focus on a fundamental understanding of the area in unit operations that include mixing, heating/cooling, reactions, and flow, physical and chemical conversions of raw materials to products are achieved. The success of these processes depends significantly on the heat and mass transfer borne along with flowing fluid and across solid/fluid interfaces.

The Transport Processes I: Heat and Mass Transfer training will focus on enhancing the comprehensive structure of the respective programme. The course will undertake transport through interfaces due solely to molecular diffusion, which is the transport of concentration or temperature gradients in a stationary fluid. In unit operations, the combination of convection (transport by moving fluids) and diffusion determines the transport rate and the overall performance.

The Transport Processes I: Heat and Mass Transfer certification will be provided at the end of the course. The candidate will acquire a physical understanding in this course of how the equilibrium between convection and diffusion influences the total transfer speeds in chemical systems and gives rise to many of the methodological parallels used in the design of chemical engineering. The course is structured as 12-week online comprehensive training along with industrial support for the course.

The Chemical Engineering Thermodynamics online course imparts knowledge to all the learners related to topics such as evaluation of laws of thermodynamics, its application, and chemical and physical process of chemistry, etc. This course provides information on the basic and key concepts of thermodynamics that would help the participants achieve their academic as well as professional goals. The candidates will learn about the numerous kinds of thermodynamics, reaction equilibria, and properties of thermodynamics. 

Candidates get to collect the certification for the Chemical Engineering Thermodynamics certification at the end of the course by giving an exam and securing the minimum grades applicable to pass the exam. The certification course takes up to 12 weeks of time to get completed. Students can learn from the Chemical Engineering Thermodynamics training at their own wish and pace as it is a self-paced course.

The Concrete Technology training lasts for a 12 weeks online program. The course's syllabus, which was selected and written by IIT Madras, is available on the Swayam platform. The organizations that grant the course certificate are IIT Madras and NPTEL.

The main topics covered in the Concrete Technology certification course are cementitious additives and other ingredients used in the production of concrete. The topic of concrete manufacturing is also brought up. 

The advantages and uses of concrete as a modern building material will become more and more clear as one move through the course. One will be able to use concrete and pick the appropriate ingredients. Prof. B. Bhattacharjee explains this online course.

Also Read: 

• Civil Engineering Certification Courses
• Construction Engineering Technology

Joining the Structural Dynamics online course by Swayam will help you understand how a structure responds, particularly buildings, to different dynamic loads. Loads such as earthquakes, machine vibration, wind, and ambient vibration. 

The complete Structural Dynamics certification syllabus has been spread over 12 weeks and divided into different modules which are delivered online. This course is a civil engineering course and categorized as a core course. 

Moreover, Swayam provides the Structural Dynamics online course at the UG level and comprehensively covers the fundamentals of structural dynamics. Other core topics included in the curriculum are Free Vibration of SDOF, Forced Vibration of SDOF, and Response to Arbitrary Motions.

The entire Response Spectrum and Earthquake Response of MDOF systems are also explored in detail, allowing you to have a firm grasp over structural analysis. Moreover, you can earn a course certificate to testify your newly acquired learnings on completing the Structural Dynamics course. 

The Strategies for Sustainable Design certification syllabus spans 12 weeks. There will be five lectures weekly. Each session will be focused on understanding the nuances of sustainability and sustainable design processes using assignments, real-life projects, and examples. 

Vital sustainability principles and concepts are discussed at length in the Strategies for Sustainable Design program. The course also intends to deliver crucial insights for various design and sustainable development processes essential to strengthen Sustainable Development (SD). 

Over the program duration, you will develop a holistic understanding of sustainability in built environments and industrial designs. You will also learn about life cycle analysis and environmental impact assessment in the Strategies for Sustainable Design course. 

For this, the course touches on different domains to facilitate curiosity and enables you to incorporate design thinking in dealing with your project work. Moreover, AICTE approves of this online course. Swayam provides a digital certificate on successful course completion and fulfilling the prescribed criteria.

Our world is surrounded by several environmental challenges that are becoming troublesome by the day. Therefore, the online course in Applied Environmental Microbiology by Swayam aims to teach students about these pressing issues by developing in-depth knowledge about microbial processes and communities, found in inbuilt and natural environments. The program holds impeccable industry support from numerous water and wastewater treatment organizations, Biotechnological companies, and Bioremediation entities. 

The Applied Environmental Microbiology certification syllabus lays a firm foundation of basic microbial energetics, microbiology, and diversity. Then, it progresses to microbiology’s tools, state-of-the-art and traditional applications, and how they address relevant environmental problems. The curriculum offers a holistic exploration of microbes’ diverse roles, microbial communities, cell elements, ecology, microbial energetics, environmental microbial processes, and more.

The Applied Environmental Microbiology online course is a 12-week, free elective training, under the civil Engineering and Environment category. This postgraduate-level program also offers certification, for which candidates must register, pay the exam fees, and clear the course-end proctored assessment. In doing so, they’ll earn an e-verified certification with NPTEL and IIT Roorkee’s logos.

The Geographic Information Systems certification course is structured with student favourable modules that will provide them with an easy environment to learn about the respective field. Detailed understanding of geographic information systems and their uses in civil engineering and earth sciences is offered in the proposed course.

In this course, all topics from data input to modeling will be addressed. Different datasets, like DEMs, their source, generation strategies, derivatives, errors and limitations, will be thoroughly explored in the proposed course. In the complete Geographic Information Systems training, the candidate will be given the continuous support that will help them to complete the whole curriculum along with timely submission of assessments.

The candidate will be given practical knowledge along with theoretical understanding of the particular concepts and the candidate can get the chance to be more creative in implementing their understanding that they will get while learning the course in respective assessments designed for the completion of the programme. The Geographic Information Systems certification will be provided in the last of the programme to give the students credit and accreditable for the course so that they can pursue the further courses in the respective field.

In the Geomorphology program, candidates will learn about the numerous behavior of natural surfaces as well as subsurface agents involved in the removal of the old and new landforms on the surface of the earth. The candidates will learn how to bring in sustainable development and the importance of every area while making any changes in the development. 

The candidates will be learning the usage of the knowledge in the industry. 

It will help candidates in the control of floods, disposal of waste, and the development of a smart city. The discussion forums will help candidates to have better learning and knowledge about the implementation of knowledge. The different layers of geomorphology have been well explained by the tutors.

The Geomorphology certification course also offers the candidates certificate after they complete the course successfully and give the end term examination. The importance of geomorphic evaluation has been well discovered throughout the syllabus. The certificate boosts up the resume or learning of the individuals.

The Water and Waste Water Treatment training is an undergraduate program that deals with the aspects of the environment and civil engineering. The course is laid out by the Indian Institute of Technology, Roorkee through the forum of Swayam. The program aims to discuss the aspects related to the subject matter and complete the Water and Waste Water Treatment certification syllabus in the time span of 12 weeks. The course imparts information regarding water treatment, wastewater systems, the process of disinfection, etc. The course is available throughout its existence at zero cost for all the students who want to join the program. Candidates can apply for this course and pursue the same till the time they are well versed with the concepts as it is a self-paced learning program. 

Candidates get to compete for the certification of the program at the end of the Water and Waste Water Treatment online course. The certification process is optional for the students and is not mandatory for everyone. Candidates who want to go through the process of giving exam fees followed by the offline exam can get the opportunity of being a certified participant of the course if they qualify for the exam as per the eligibility criteria announced by the website. Candidates who enrol in the Water and Waste Water Treatment certification course will get introduced to the practical problems that the industry faces on a common basis through case studies and practical examples. Participants also get the opportunity to understand the concepts in a better manner through assignments, tests, and quizzes provided in the course.

The Fluid Mechanics course is an interdisciplinary programme which will cover the principles and applications of Fluid Mechanics in Mechanical Engineering, Civil Engineering and Chemical Engineering. Through this course, you will acquire new problem-solving techniques like streamline patterns and control volume concepts. The course will also demonstrate the visualisation of fluid-flow problems.

The curriculum in the Fluid Mechanics programme includes lessons on Properties of Fluids, Fluid Kinematics, Flow-through Pipes, Mass, Bernoulli & Energy Equations, and more. On course completion, you will have a robust foundation on Fluid Machines so that you can apply the essential laws and principles to engineering designs, as required. 

Moreover, Prof. Subashisa Dutta, who has been teaching for more than 15 years in IIT Guwahati, will teach this course, while the NPTEL offers the online course in collaboration with IIT Guwahati. Any interested learners can join the Fluid Mechanics online programme; however, they must have prior knowledge of Fluid Mechanics fundamentals. 

Advanced Soil Mechanics program is an excellent course for anyone who wants to brush up and reinforce their foundational concepts learned during their undergraduate training. It deals with various topics related to geotechnical engineering that are studied by postgraduate students from the basics. Topics such as continuum mechanics and geomechanical characteristics of soil will be explored.

Advanced Soil Mechanics certification is an elective course in the field of civil engineering and structural analysis. It has been approved by the All India Council for Technical  Education as an FDP for the faculty development program. The course syllabus has been developed by IIT Guwahati in association with Swayam. 

Advanced Soil Mechanics is a twelve-week long course that employs assignments and a final exam to motivate students and help them evaluate their progress. The course also offers an e-certificate which will be awarded after completing the course successfully. While all the lectures will be held online, the exam will be held in person at the various designated exam centers.

The Engineering Hydrology certification course is a 12 weeks online program. This Engineering Hydrology Certification syllabus is decided and made up by the IIT Guwahati, but the course is offered through the platform of Swayam, and this course certificate is granted by the institutions of NPTEL and the Indian Institute of Management Guwahati. 

The  Engineering Hydrology training belongs to the core program section, which deals with water's complex interaction and pathways connecting the hydrosphere, atmosphere, and lithosphere. Here the course will give us an idea of how hydrological science is mathematically quantified for engineering applications to manage water resources. Professor Dr. Sreeja Pekkat explains this certificate course.

The Geology And Soil Mechanics certification course will help candidates gain insights on the basic properties as well as index properties of soil. The course has been extensively designed for the candidates with mechanics of solids where they will be exposed to the industry learning as well.

The candidates will be learning all the various terminologies and the experts will be assessing the learning and participation of the  participants in every module. The candidates will have effective learning in every module. The topics have been considered as per the latest trends in this industry.

The Geology And Soil Mechanics certification benefits all the topics which have been well explained. The candidates will be receiving certification for the course as well. The Geology And Soil Mechanics certification course will help candidates to get jobs and recommendations in other industries as well. The theories have also been added in the course and fundamental of consolidation.

The Structural Geology program is approved by AICTE and offered by IIT Kanpur. It primarily focuses on structural geology fundamentals. The course layout has been specially designed to provide an introductory level understanding of this subject, which belongs to the earth Sciences category.

Knowledge of basic maths and physics will be essential in adequately completing the Structural Geology certification syllabus. Undergraduates interested in learning geology can join the course and understand the subject in detail. 

The Structural Geology online course broadly covers concepts of geometry, kinematics/strain, and dynamics/stress in Earth and other planetary bodies. You will learn to use geological time scales to understand how rocks deform over time through weekly lectures by Prof. Santanu Misra of IIT Kanpur. 

Moreover, you can take an optional proctored exam to receive the Structural Geology certificate and acknowledge your newly acquired knowledge. This online program also has a free registration process, so you can audit it without paying a fee.

The Mechanics of Solids training lasts for 12 weeks as an online program. The course's syllabus was chosen and designed by IIT Kanpur and is offered on the Swayam platform. The organizations that grant the course certificate are IIT and NPTEL.

The mechanics of deformable solid bodies will be introduced in this course. The main goal of the course is to give the students the skills they need to solve mechanical problems, which include performing a static analysis of a component to identify internal actions (forces and moments), calculating stresses, strains, and deformation brought on by internal actions, and comparing those results to accepted standards. 

This calls for a command of the industry jargon, the ability to draw free-body diagrams, and an understanding of how materials react to loads. The ability of students to design engineering systems should improve. Prof. Priyanka Gosh explains this online course.

Also Read: Civil Engineering Certification Courses

The Basic Construction Materials online course is intended for those candidates who are working or studying in the construction sector. The course is about the structural elements of construction materials.  The course will emphasize forming the basic understanding of the relationship between material compositions and the constructed structures. The candidates of this course will be thoroughly guided by construction engineering experts.

The course has scheduled start and end dates. The course is offered on the Swayam platform. It is verified by NPTEL. The course will be instructed by two faculty professors of the Indian Institute of Technology. The course will have weekly graded assignments. The candidates must register for the certification examination.

The Basic Construction Materials certification will have logos of the Indian Institute of Technology Madras and NPTEL. The candidates who wish to go for higher studies in construction-related engineering will be benefitted. The engineering professionals can gain promotional help from the certification.

This course will give an understanding of the concept and the idea of geosynthetics and their production and their conduct with the applications in various structural designing plans. In Geosynthetics And Reinforced Soil Structures Online Course will be under the guidance of professor K.Rajagopal a retired faculty in the department of civil engineering from IIT Madras.

The Geosynthetics And Reinforced Soil Structures Certification Syllabus will provide the candidate knowledge in the field of reinforced soil slopes, soft foundation soils, and many other aspects. The candidate will learn about the seismic loads and internal stability analysis of reinforced soil walls.

The candidate can access the Geosynthetics And Reinforced Soil Structures Programme for free of cost and they will be getting a certificate having the logos of Andhra University and NPTEL. The course will give the candidate clarity in the design of reinforced soil retaining walls supporting a bridge abutment with geosynthetics for the construction of municipal and hazardous waste landfills. In addition to this, the candidates will be able to access this programme for free which will enable them to take it at any point in time.

Various concrete structures are mushrooming in India. It is crucial to take care of the quality of these structures to prevent accidents, mishaps, and damage in the future. This course on Maintenance and Repair of Concrete Structures by Swayam aims to create educated civil engineers who can check on the quality of these structures and perform repairs if the need arises.

The Maintenance and Repair of Concrete Structures training is useful in teaching candidates how to repair concrete buildings and select the materials and systems to make the repairs last. The training focus will be on preventive maintenance strategy rather than corrective maintenance strategy. Candidates will get full training in how to predict potential problems.

The Maintenance and Repair of Concrete Structures syllabus will discuss concepts like typical near-surface repair, structural strengthening, corrosion protection, structural stabilisation, etc. in detail. This is an AICTE-approved course on the Faculty Development Program by IIT Madras, one of the highest-ranking engineering institutes in India. Candidates can enrol for free.