DTU Delhi All Questions

Hello

It is not possible to calculate the exact GATE score as it is calculated on the relative performance of a student in comparision with students who appeared for the same paper keeping the difficulty levels of the sessions in mind.

Since the number of students who appeared for the certain GATE paper is not disclosed, it is difficult to calculate the scores.

However, according to the previous year trends your probable score will be around 653- 693.

You can use the GATE College Predictor tool with PSU Chances to check your chances in colleges based on your score-

https://engineering.careers360.com/gate-college-predictor

Good Luck!

p { margin-bottom: 0.25cm; line-height: 120%; }a:link { }

Hello Nitin,

           thanks for writing to us. We will be pleased to answer you. Congratulations on your performance in the JEE exam. Hope in the next session you will suppress this rank also. As of now, your probable streams are listed below:

According to your given information, your probable rank will be between 189824 to 209824. For predicting your rank you can use our very own JEE Rank Predictor. The link is given here https://engineering.careers360.com/jee-main-rank-predictor

• DELHI TECHNOLOGICAL UNIVERSITY:

                                 Delhi Technological University (DTU), formerly known as Delhi College of Engineering (DCE) is one of the leading universities in India. At present, it offers B.Tech, B.Des., M.Tech, MBA and Ph.D. programs in various specializations. They offer a full-time B.Tech course in 15 specializations. Minimum eligibility for admission is 10+2 (PCM) with at least 60% marks in aggregate from a recognized board. Final admission is based on the score in JEE Main followed by Joint Admission Counselling (JAC). Course Fees here is around 781000 INR.

 But we are very sorry to state that you are not in a position to secure any of the engineering disciplines offered by DTU as of now. But don't be disappointed, you still have a second chance. Make most of that. Remind that previous years students didn't get the chance, so grab it with both hands and utilize it. If you are not going to sit for the n3ext session and think to get colleges by this results only, then I would like to tell you that we have developed a software determining the exact college which will you get after counseling. The link is here https://engineering.careers360.com/jee-main-college-predictor Keeping in mind previous years cutoff we have prepared this, you can access this easily. 

So personally it's my request before deciding anything please have a look at the colleges you will be getting by this rank. For further information, don't hesitate to inbox us or comment below!

Regards,

HELLO!SANCHAY

With this marks you may get DTU for mtech programe.Cuttoff of DTU get changes each year.This year cuttoff marks for electrical stream may get high as level of paper was easy in comparison to previous  years.Previous years candidates get seats in DTU for mtech program with this marks.You can aslo approach for NIts with this marks but chance of getting top ranked NITs is low.Wait till IIT madras announces gate score.

GOOD LUCK!

Hello Pragun,

ATQ, you have:

Rank: 501 (general)

Marks: 139/300

And you want to know:

• Whether or not you'll get DTU
• In case you get compartment in an exam, how that will affect your chances in admission

Whether or not you'll get DTU

First off, UCEED or Undergraduate Common Entrance Examination for Design is an entrance examination which is administered by Indian Institute of Technology (IIT), Bombay. It is a joint entrance examination for admission in Bachelor of Design programs primarily in:

• IIT-Bombay
• IIT-Guwahati
• IITDM-Jabalpur.

Cutoff 2018 for general category:

• IIITDM Jabalpur: 32-75 (first round), 51-88 (second round), 51-95 (third round)
• IIT Guwahati: 17-53(first round), 17-55 (second round), 17-58(third round)
• IIT Bombay: 1-16 (first round), 0-0 (closed for second, third round)

Cutoff 2017 for general category:

• IIIT Delhi: 13-751 (first round), 788-857 (second round), 837-998(third round)
• IITB: 1-20 (first round), 23-25 (second round), closed for third round
• IIITDMJ: 48-73 (first round), 74-90(first round), 92-97 (third round)

As a result, you have a very poor chance of getting admission in any of the IIT's. 

Admission for Bachelor in Design (B.Des) is done on the basis of UCEED rank. In Delhi Technological University, B.Design is the first course that the entire Department of Design at DTU. The rank in the UCEED at which students are selected at DTU for a B.Des goes as high as 185/300 (AIR 92) and as low as 59/300 (AIR 5900). 

Yes, you have a good chance of getting DTU. Selection is done on the basis of UCEED score. Total number of seats for the admission in B.des is 60.

• 85%: Candidates who have qualified degree from the institute in Delhi or NCT of Delhi.
• 15%: Candidates who belong to school outside Delhi.

Since you're a candidate of other states, there is high competition over only 15% of total seats, i.e, 9 seats.

In case you get compartment in an exam, how that will affect your chances in admission

A candidate, including a foreign national, must satisfy each and every of the following three criteria to appear in UCEED:

• Age limit- The candidate should have been born on or after October 1, 1993, if belonging to the OPEN or OBC-NCL category and, on or after October 1, 1988, if belonging to the SC, ST or Person with Disabilities category.
• Qualifying Examination- The candidate should have passed the qualifying examination (Class XII or equivalent) in 2018, or appearing in 2019. Students from ALL STREAMS (Science, Commerce, and Arts & Humanities) are eligible.

Now, lets have a look at DTU admission eligibility criteria:

• The final examination of the 10+2 system, conducted by a Central or State Board recognized by the Association of Indian Universities.
• A Diploma recognized by the All India Council for Technical Education or a State Board of Technical Education of at least 3 years duration.

Eligibility for admission in B.Des:

• Minimum eligibility for B.Des. program is candidates must have passed 10+2/ PUC/ Intermediate examination or HSC Vocational examination recognized by Association of Indian Universities (AIU).

According to cbse.nic.in, In order to be declared as having passed the examination, a candidate shall obtain a grade higher than E (i.e. at least 33% marks) in all the five subjects of external examination in the main or at the compartmental examinations. The pass marks in each subject of external examination shall be 33%.

• Admission on the basis of UCEED rank.

Only the rank you secure in UCEED will tell whether or not you'll manage to get admission in one of the most renowned institutions of the country; reexamination or not, board result is a board result.

In case you get compartment: You wouldn't have to repeat a year but will be forced to give supplementary exam/ reexamination to be declared as pass. This will consequently expire your present UCEED marks (UCEED score is valid for one year, and only for admissions in the corresponding academic year) and you'll have to appear for UCEED again in 2020 which will also be your last attempt to take the exam (A candidate can attempt UCEED for a maximum of two times and that too in consecutive years).

Long story short, you wouldn't be able to take admission in DTU this year if you fail in any of the subjects. 

I hope this answers your queries.

Best of luck!

Hello dear, 

According to previous year cutoff of DTU Delhi you should bring your rank under 45000 in order to get CSE in DTU (Delhi region). To get this rank you have to score above 95 percentile in jee mains to secure your seat. 

Hope this helps you. 

Hey Ayush.

See the marks u have scored in the GATE exam is equivalent to the 30-35 marks out of the 100. This marks is enough for u to get admissioned there under ur OB quota. But that too can't be said in surity as the level of paper this year was bit different.

So if u are focussiif in that college u must go for it as u are having a good chances for getting there admissioned for pursuing ur higher studies.

Hope this helped u. Ask If u are having any query.

Good luck

HELLO ANNU!

DTU Mtech 2019 cuttoff will comprise of normalized GATE 2019 score or thr cuttoff set by the institute.DTU M.tech 2019 cutoff will vary for each course and each category.I am providing you  minimum normalized gate marks required for getting admission in following stream with their respected marks:

ME :43, EE: 45, CE:48,ECE:40.This figure may change as it deoends upon difficulty level of paper and number of intrested candidates seeking admission in DTU.For sureity wait till final results get declared by IIT madras and then DTU will release cuttoff score for each stream and each category.

You can ask if you have any other queries.

GOOD LUCK!